Warning

Most of the documentation was written prior to version 0.5 and needs to be updated. This work has now started for version 0.7 and we aim to have it completed before version 0.8 is available.

Friendly tracebacks - in English

Friendly aims to provide friendlier feedback when an exception is raised than what is done by Python. Below, we can find some examples. SyntaxError cases, as well as TabError and IndentationError cases, are shown in a separate page. Not all cases handled by friendly are included here.

Note

The content of this page is generated by running trb_english.py located in the tests/ directory. This needs to be done explicitly, independently of updating the documentation using Sphinx.

Friendly-traceback version: 0.7.53 Python version: 3.10.6

ArithmeticError

Generic

Traceback (most recent call last):
  File "TESTS:\runtime\test_arithmetic_error.py", line 9, in test_Generic
    raise ArithmeticError('error')
ArithmeticError: error

`ArithmeticError` is the base class for those built-in exceptions
that are raised for various arithmetic errors.

Exception raised on line `9` of file 'TESTS:\runtime\test_arithmetic_error.py'.

    4| def test_Generic():
    5|     try:
    6|         # I am not aware of any way in which this error is raised directly
    7|         # Usually, a subclass such as ZeroDivisionError, etc., would
    8|         # likely be raised.
--> 9|         raise ArithmeticError('error')
   10|     except ArithmeticError as e:

        ArithmeticError:  <class ArithmeticError>

AssertionError

Generic

Traceback (most recent call last):
  File "TESTS:\runtime\test_assertion_error.py", line 8, in test_Generic
    raise AssertionError("Fake message")
AssertionError: Fake message

In Python, the keyword `assert` is used in statements of the form
`assert condition`, to confirm that `condition` is not `False`,
nor equivalent to `False` such as an empty list, etc.

If `condition` is `False` or equivalent, an `AssertionError` is raised.

Exception raised on line `8` of file 'TESTS:\runtime\test_assertion_error.py'.

   4| def test_Generic():
   5|     try:
   6|         # We raise it explicitly, rather than with the keyword assert, since
   7|         # we don't want pytest to rewrite out test.
-->8|         raise AssertionError("Fake message")
   9|     except AssertionError as e:

        AssertionError:  <class AssertionError>

AttributeError

Attribute from other module

Traceback (most recent call last):
  File "TESTS:\runtime\test_attribute_error.py", line 336, in test_Attribute_from_other_module
    keyword.pi
AttributeError: module 'keyword' has no attribute 'pi'

    Did you mean one of the following modules: `math, cmath`?
An `AttributeError` occurs when the code contains something like
    `object.x`
and `x` is not a method or attribute (variable) belonging to `object`.

Instead of the module `keyword`, perhaps you wanted to use
the attribute `pi` of one of the following modules:
`math, cmath`.

Exception raised on line `336` of file 'TESTS:\runtime\test_attribute_error.py'.

   332|     assert "Did you mean `math`?" in result
   333|
   334| import cmath
   335| try:
-->336|     keyword.pi
            ^^^^^^^^^^
   337| except AttributeError as e:

        keyword:  <module keyword> from PYTHON_LIB:\keyword.py

Builtin function

Traceback (most recent call last):
  File "TESTS:\runtime\test_attribute_error.py", line 229, in test_Builtin_function
    len.text
AttributeError: 'builtin_function_or_method' object has no attribute 'text'

    Did you mean `len(text)`?

An `AttributeError` occurs when the code contains something like
    `object.x`
and `x` is not a method or attribute (variable) belonging to `object`.

`len` is a function. Perhaps you meant to write
`len(text)`

Exception raised on line `229` of file 'TESTS:\runtime\test_attribute_error.py'.

   226| def test_Builtin_function():
   227|     text = 'Hello world!'
   228|     try:
-->229|         len.text
                ^^^^^^^^
   230|     except AttributeError as e:

        text:  'Hello world!'
        len:  <builtin function len>

Builtin module with no file

Traceback (most recent call last):
  File "TESTS:\runtime\test_attribute_error.py", line 247, in test_Builtin_module_with_no_file
    sys.foo
AttributeError: module 'sys' has no attribute 'foo'

An `AttributeError` occurs when the code contains something like
    `object.x`
and `x` is not a method or attribute (variable) belonging to `object`.

Python tells us that no object with name `foo` is
found in module `sys`.

Exception raised on line `247` of file 'TESTS:\runtime\test_attribute_error.py'.

   243| """Issue 116"""
   244| import sys
   245|
   246| try:
-->247|     sys.foo
            ^^^^^^^
   248| except AttributeError as e:

        sys:  <module sys (builtin)>

Circular import

Traceback (most recent call last):
  File "TESTS:\runtime\test_attribute_error.py", line 368, in test_Circular_import
    import my_turtle1
  File "TESTS:\my_turtle1.py", line 4, in <module>
    a = my_turtle1.something
AttributeError: partially initialized module 'my_turtle1' has no attribute 'something' (most likely due to a circular import)

    Did you give your program the same name as a Python module?

An `AttributeError` occurs when the code contains something like
    `object.x`
and `x` is not a method or attribute (variable) belonging to `object`.

I suspect that you used the name `my_turtle1.py` for your program
and that you also wanted to import a module with the same name
from Python's standard library.
If so, you should use a different name for your program.

Execution stopped on line `368` of file 'TESTS:\runtime\test_attribute_error.py'.

   365| from friendly_traceback.runtime_errors import stdlib_modules
   366| stdlib_modules.names.add("my_turtle1")
   367| try:
-->368|    import my_turtle1
   369| except AttributeError as e:

Exception raised on line `4` of file 'TESTS:\my_turtle1.py'.

   1| """To test attribute error of partially initialized module."""
   2| import my_turtle1
   3|
-->4| a = my_turtle1.something
          ^^^^^^^^^^^^^^^^^^^^

        my_turtle1:  <module my_turtle1> from TESTS:\my_turtle1.py

Circular import b

Traceback (most recent call last):
  File "TESTS:\runtime\test_attribute_error.py", line 386, in test_Circular_import_b
    import circular_c
  File "TESTS:\circular_c.py", line 4, in <module>
    a = circular_c.something
AttributeError: partially initialized module 'circular_c' has no attribute 'something' (most likely due to a circular import)

    You have a circular import.

An `AttributeError` occurs when the code contains something like
    `object.x`
and `x` is not a method or attribute (variable) belonging to `object`.

Python indicated that the module `{module}` was not fully imported.
This can occur if, during the execution of the code in module `circular_c`
an attempt is made to import the same module again.

Execution stopped on line `386` of file 'TESTS:\runtime\test_attribute_error.py'.

   384| def test_Circular_import_b():
   385|     try:
-->386|         import circular_c
   387|     except AttributeError as e:

Exception raised on line `4` of file 'TESTS:\circular_c.py'.

   1| # Attribute error for partially initialize module
   2| import circular_c
   3|
-->4| a = circular_c.something
          ^^^^^^^^^^^^^^^^^^^^

        circular_c:  <module circular_c> from TESTS:\circular_c.py

Generic

Traceback (most recent call last):
  File "TESTS:\runtime\test_attribute_error.py", line 26, in test_Generic
    A.x  # testing type
AttributeError: type object 'A' has no attribute 'x'

An `AttributeError` occurs when the code contains something like
    `object.x`
and `x` is not a method or attribute (variable) belonging to `object`.

The object `A` has no attribute named `x`.

Exception raised on line `26` of file 'TESTS:\runtime\test_attribute_error.py'.

   22| class A:
   23|     pass
   24|
   25| try:
-->26|     A.x  # testing type
           ^^^
   27| except AttributeError as e:

        A:  <class A> defined in <function test_attribute_error.test_Generic>

Generic different frame

Traceback (most recent call last):
  File "TESTS:\runtime\test_attribute_error.py", line 50, in test_Generic_different_frame
    a.attr
AttributeError: 'A' object has no attribute 'attr'. Did you mean: 'attr2'?

    Did you mean `attr2`?

An `AttributeError` occurs when the code contains something like
    `object.x`
and `x` is not a method or attribute (variable) belonging to `object`.

The object `a` has no attribute named `attr`.
Perhaps you meant to write `a.attr2` instead of `a.attr`

Exception raised on line `50` of file 'TESTS:\runtime\test_attribute_error.py'.

   46|     return A()
   47|
   48| a = f()
   49| try:
-->50|     a.attr
           ^^^^^^
   51| except AttributeError as e:

        a:  <A object>
            defined in <function test_attribute_error.test_Generic_different_frame.<locals>.f>

Generic instance

Traceback (most recent call last):
  File "TESTS:\runtime\test_attribute_error.py", line 69, in test_Generic_instance
    a.x
AttributeError: 'A' object has no attribute 'x'

An `AttributeError` occurs when the code contains something like
    `object.x`
and `x` is not a method or attribute (variable) belonging to `object`.

The object `a` has no attribute named `x`.

Exception raised on line `69` of file 'TESTS:\runtime\test_attribute_error.py'.

   66|     pass
   67| a = A()
   68| try:
-->69|     a.x
           ^^^
   70| except AttributeError as e:

        a:  <A object>
            defined in <function test_attribute_error.test_Generic_instance>

Module attribute typo

Traceback (most recent call last):
  File "TESTS:\runtime\test_attribute_error.py", line 150, in test_Module_attribute_typo
    math.cost
AttributeError: module 'math' has no attribute 'cost'. Did you mean: 'cos'?

    Did you mean `cos`?

An `AttributeError` occurs when the code contains something like
    `object.x`
and `x` is not a method or attribute (variable) belonging to `object`.

Instead of writing `math.cost`, perhaps you meant to write one of
the following names which are attributes of module `math`:
`cos, cosh`

Exception raised on line `150` of file 'TESTS:\runtime\test_attribute_error.py'.

   145|     assert "Did you mean `ascii_lowercase`" in result
   146|
   147| import math
   148|
   149| try:
-->150|     math.cost
            ^^^^^^^^^
   151| except AttributeError as e:

        math:  <module math (builtin)>

Nonetype

Traceback (most recent call last):
  File "TESTS:\runtime\test_attribute_error.py", line 191, in test_Nonetype
    a.b
AttributeError: 'NoneType' object has no attribute 'b'

An `AttributeError` occurs when the code contains something like
    `object.x`
and `x` is not a method or attribute (variable) belonging to `object`.

You are attempting to access the attribute `b`
for a variable whose value is `None`.
Exception raised on line `191` of file 'TESTS:\runtime\test_attribute_error.py'.

   188| def test_Nonetype():
   189|     a = None
   190|     try:
-->191|         a.b
                ^^^
   192|     except AttributeError as e:

        a:  None

Object attribute typo

Traceback (most recent call last):
  File "TESTS:\runtime\test_attribute_error.py", line 86, in test_Object_attribute_typo
    a.appendh(4)
AttributeError: 'list' object has no attribute 'appendh'. Did you mean: 'append'?

    Did you mean `append`?

An `AttributeError` occurs when the code contains something like
    `object.x`
and `x` is not a method or attribute (variable) belonging to `object`.

The object `a` has no attribute named `appendh`.
Perhaps you meant to write `a.append` instead of `a.appendh`

Exception raised on line `86` of file 'TESTS:\runtime\test_attribute_error.py'.

   82| def test_Object_attribute_typo():
   83|     #
   84|     try:
   85|         a = [1, 2, 3]
-->86|         a.appendh(4)
               ^^^^^^^^^
   87|     except AttributeError as e:

        a:  [1, 2, 3]

Perhaps comma

Traceback (most recent call last):
  File "TESTS:\runtime\test_attribute_error.py", line 213, in test_Perhaps_comma
    .defg]
AttributeError: 'str' object has no attribute 'defg'

    Did you mean to separate object names by a comma?

An `AttributeError` occurs when the code contains something like
    `object.x`
and `x` is not a method or attribute (variable) belonging to `object`.

`defg` is not an attribute of `abcd`.
However, both `abcd` and `defg` are known objects.
Perhaps you wrote a period to separate these two objects,
instead of using a comma.

Exception raised on line `213` of file 'TESTS:\runtime\test_attribute_error.py'.

   208| defg = "world"
   209|
   210| # fmt: off
   211| try:
   212|     a = [abcd
                 ^^^^
-->213|     .defg]
            ^^^^^
   214| # fmt: on

        abcd:  'hello'
        defg:  'world'

Read only

Traceback (most recent call last):
  File "TESTS:\runtime\test_attribute_error.py", line 289, in test_Read_only
    f.b = 1
AttributeError: 'F' object attribute 'b' is read-only

An `AttributeError` occurs when the code contains something like
    `object.x`
and `x` is not a method or attribute (variable) belonging to `object`.

Object `f` uses `__slots__` to specify which attributes can
be changed. The value of attribute `f.b` cannot be changed.
The only attribute of `f` whose value can be changed is`a`.

Exception raised on line `289` of file 'TESTS:\runtime\test_attribute_error.py'.

   285|     b = 2
   286|
   287| f = F()
   288| try:
-->289|     f.b = 1
            ^^^
   290| except AttributeError as e:

        f:  <F object>
            defined in <function test_attribute_error.test_Read_only>
        f.b:  2

Shadow stdlib module

Traceback (most recent call last):
  File "TESTS:\runtime\test_attribute_error.py", line 172, in test_Shadow_stdlib_module
    turtle.Pen
AttributeError: module 'turtle' has no attribute 'Pen'

    Did you give your program the same name as a Python module?

An `AttributeError` occurs when the code contains something like
    `object.x`
and `x` is not a method or attribute (variable) belonging to `object`.

You imported a module named `turtle` from `TESTS:\turtle.py`.
There is also a module named `turtle` in Python's standard library.
Perhaps you need to rename your module.

Exception raised on line `172` of file 'TESTS:\runtime\test_attribute_error.py'.

   168| def test_Shadow_stdlib_module():
   169|     import turtle
   170|
   171|     try:
-->172|         turtle.Pen
                ^^^^^^^^^^
   173|     except AttributeError as e:

        turtle:  <module turtle> from TESTS:\turtle.py

Tuple by accident

Traceback (most recent call last):
  File "TESTS:\runtime\test_attribute_error.py", line 305, in test_Tuple_by_accident
    something.upper()
AttributeError: 'tuple' object has no attribute 'upper'

    Did you write a comma by mistake?

An `AttributeError` occurs when the code contains something like
    `object.x`
and `x` is not a method or attribute (variable) belonging to `object`.

`something` is a tuple that contains a single item
which does have `'upper'` as an attribute.
Perhaps you added a trailing comma by mistake at the end of the line
where you defined `something`.

Exception raised on line `305` of file 'TESTS:\runtime\test_attribute_error.py'.

   302| def test_Tuple_by_accident():
   303|     something = "abc",  # note trailing comma
   304|     try:
-->305|         something.upper()
                ^^^^^^^^^^^^^^^
   306|     except AttributeError as e:

        something:  ('abc',)

Use builtin

Traceback (most recent call last):
  File "TESTS:\runtime\test_attribute_error.py", line 103, in test_Use_builtin
    a.length()
AttributeError: 'list' object has no attribute 'length'

    Did you mean `len(a)`?

An `AttributeError` occurs when the code contains something like
    `object.x`
and `x` is not a method or attribute (variable) belonging to `object`.

The object `a` has no attribute named `length`.
Perhaps you can use the Python builtin function `len` instead:
`len(a)`.
Exception raised on line `103` of file 'TESTS:\runtime\test_attribute_error.py'.

    99| def test_Use_builtin():
   100|     #
   101|     try:
   102|         a = [1, 2, 3]
-->103|         a.length()
                ^^^^^^^^
   104|     except AttributeError as e:

        a:  [1, 2, 3]

Use join with str

Traceback (most recent call last):
  File "TESTS:\runtime\test_attribute_error.py", line 351, in test_Use_join_with_str
    a = ['a', '2'].join('abc') + ['b', '3'].join('\n')
AttributeError: 'list' object has no attribute 'join'

    Did you mean `'abc'.join(['a', '2'])`?

An `AttributeError` occurs when the code contains something like
    `object.x`
and `x` is not a method or attribute (variable) belonging to `object`.

The object `['a', '2']` has no attribute named `join`.
Perhaps you wanted something like `'abc'.join(['a', '2'])`.

Exception raised on line `351` of file 'TESTS:\runtime\test_attribute_error.py'.

   349| def test_Use_join_with_str():
   350|     try:
-->351|         a = ['a', '2'].join('abc') + ['b', '3'].join('\n')
                    ^^^^^^^^^^^^^^^
   352|     except AttributeError as e:

Use synonym

Traceback (most recent call last):
  File "TESTS:\runtime\test_attribute_error.py", line 120, in test_Use_synonym
    a.add(4)
AttributeError: 'list' object has no attribute 'add'

    Did you mean `append`?

An `AttributeError` occurs when the code contains something like
    `object.x`
and `x` is not a method or attribute (variable) belonging to `object`.

The object `a` has no attribute named `add`.
However, `a` has the following attributes with similar meanings:
`append, extend, insert`.

Exception raised on line `120` of file 'TESTS:\runtime\test_attribute_error.py'.

   116| def test_Use_synonym():
   117|     #
   118|     try:
   119|         a = [1, 2, 3]
-->120|         a.add(4)
                ^^^^^
   121|     except AttributeError as e:

        a:  [1, 2, 3]

Using slots

Traceback (most recent call last):
  File "TESTS:\runtime\test_attribute_error.py", line 268, in test_Using_slots
    f.b = 1
AttributeError: 'F' object has no attribute 'b'

An `AttributeError` occurs when the code contains something like
    `object.x`
and `x` is not a method or attribute (variable) belonging to `object`.

The object `f` has no attribute named `b`.
Note that object `f` uses `__slots__` which prevents
the creation of new attributes.
The following are some of its known attributes:
`a`.
Exception raised on line `268` of file 'TESTS:\runtime\test_attribute_error.py'.

   264|     __slots__ = ["a"]
   265|
   266| f = F()
   267| try:
-->268|     f.b = 1
            ^^^
   269| except AttributeError as e:

        f:  <F object>
            defined in <function test_attribute_error.test_Using_slots>

FileNotFoundError

Directory not found

Traceback (most recent call last):
  File "TESTS:\runtime\test_file_not_found_error.py", line 73, in test_Directory_not_found
    open("does_not_exist/file.txt")
FileNotFoundError: [Errno 2] No such file or directory: 'does_not_exist/file.txt'

A `FileNotFoundError` exception indicates that you
are trying to open a file that cannot be found by Python.
This could be because you misspelled the name of the file.

In your program, the name of the
file that cannot be found is `file.txt`.
does_not_exist
is not a valid directory.

Exception raised on line `73` of file 'TESTS:\runtime\test_file_not_found_error.py'.

   71| def test_Directory_not_found():
   72|     try:
-->73|         open("does_not_exist/file.txt")
               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
   74|     except FileNotFoundError as e:

        open:  <builtin function open>

Filename not found

Traceback (most recent call last):
  File "TESTS:\runtime\test_file_not_found_error.py", line 7, in test_Filename_not_found
    open("does_not_exist")
FileNotFoundError: [Errno 2] No such file or directory: 'does_not_exist'

A `FileNotFoundError` exception indicates that you
are trying to open a file that cannot be found by Python.
This could be because you misspelled the name of the file.

In your program, the name of the
file that cannot be found is `does_not_exist`.
It was expected to be found in the
`C:\Users\Andre\github\friendly-traceback\tests` directory.
I have no additional information for you.

Exception raised on line `7` of file 'TESTS:\runtime\test_file_not_found_error.py'.

   5| def test_Filename_not_found():
   6|     try:
-->7|         open("does_not_exist")
              ^^^^^^^^^^^^^^^^^^^^^^
   8|     except FileNotFoundError as e:

        open:  <builtin function open>

Filename not found 2

Traceback (most recent call last):
  File "TESTS:\runtime\test_file_not_found_error.py", line 31, in test_Filename_not_found_2
    open("setupp.py")
FileNotFoundError: [Errno 2] No such file or directory: 'setupp.py'

    Did you mean `setup.py`?

A `FileNotFoundError` exception indicates that you
are trying to open a file that cannot be found by Python.
This could be because you misspelled the name of the file.

In your program, the name of the
file that cannot be found is `setupp.py`.
It was expected to be found in the
`C:\Users\Andre\github\friendly-traceback` directory.
The file `setup.py` has a similar name.

Exception raised on line `31` of file 'TESTS:\runtime\test_file_not_found_error.py'.

   27| if chdir:
   28|     os.chdir("..")
   29|
   30| try:
-->31|     open("setupp.py")
           ^^^^^^^^^^^^^^^^^
   32| except FileNotFoundError as e:

        open:  <builtin function open>

Filename not found 3

Traceback (most recent call last):
  File "TESTS:\runtime\test_file_not_found_error.py", line 54, in test_Filename_not_found_3
    open("setup.pyg")
FileNotFoundError: [Errno 2] No such file or directory: 'setup.pyg'

    Did you mean `setup.py`?

A `FileNotFoundError` exception indicates that you
are trying to open a file that cannot be found by Python.
This could be because you misspelled the name of the file.

In your program, the name of the
file that cannot be found is `setup.pyg`.
It was expected to be found in the
`C:\Users\Andre\github\friendly-traceback` directory.
Perhaps you meant one of the following files with similar names:
`setup.py`, `setup.cfg`

Exception raised on line `54` of file 'TESTS:\runtime\test_file_not_found_error.py'.

   51| if chdir:
   52|     os.chdir("..")
   53| try:
-->54|     open("setup.pyg")
           ^^^^^^^^^^^^^^^^^
   55| except FileNotFoundError as e:

        open:  <builtin function open>

ImportError

Simple import error

Traceback (most recent call last):
  File "TESTS:\runtime\test_import_error.py", line 56, in test_Simple_import_error
    from math import Pi
ImportError: cannot import name 'Pi' from 'math' (unknown location)

    Did you mean `pi`?

An `ImportError` exception indicates that a certain object could not
be imported from a module or package. Most often, this is
because the name of the object is not spelled correctly.

Perhaps you meant to import `pi` (from `math`) instead of `Pi`

Exception raised on line `56` of file 'TESTS:\runtime\test_import_error.py'.

   52| multiple_import_on_same_line()
   53| wrong_case()
   54|
   55| try:
-->56|     from math import Pi
   57| except ImportError as e:

IndexError

Assignment

Traceback (most recent call last):
  File "TESTS:\runtime\test_index_error.py", line 87, in test_Assignment
    a[13] = 1
IndexError: list assignment index out of range

An `IndexError` occurs when you try to get an item from a list,
a tuple, or a similar object (sequence), and use an index which
does not exist; typically, this happens because the index you give
is greater than the length of the sequence.

You have tried to assign a value to index `13` of `a`,
a `list` of length `10`.
The valid index values of `a` are integers ranging from
`-10` to `9`.

Exception raised on line `87` of file 'TESTS:\runtime\test_index_error.py'.

   83|     assert "You have tried to assign a value to index `1` of `b`," in result
   84|     assert "a `list` which contains no item." in result
   85|
   86| try:
-->87|     a[13] = 1
           ^^^^^
   88| except IndexError as e:

        a:  [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]

Empty

Traceback (most recent call last):
  File "TESTS:\runtime\test_index_error.py", line 42, in test_Empty
    c = a[1]
IndexError: list index out of range

    `a` contains no item.

An `IndexError` occurs when you try to get an item from a list,
a tuple, or a similar object (sequence), and use an index which
does not exist; typically, this happens because the index you give
is greater than the length of the sequence.

You have tried to get the item with index `1` of `a`,
a `list` which contains no item.

Exception raised on line `42` of file 'TESTS:\runtime\test_index_error.py'.

   39| def test_Empty():
   40|     a = []
   41|     try:
-->42|         c = a[1]
                   ^^^^
   43|     except IndexError as e:

        a:  []

Long list

Traceback (most recent call last):
  File "TESTS:\runtime\test_index_error.py", line 27, in test_Long_list
    print(a[60], b[0])
IndexError: list index out of range

An `IndexError` occurs when you try to get an item from a list,
a tuple, or a similar object (sequence), and use an index which
does not exist; typically, this happens because the index you give
is greater than the length of the sequence.

You have tried to get the item with index `60` of `a`,
a `list` of length `40`.
The valid index values of `a` are integers ranging from
`-40` to `39`.

Exception raised on line `27` of file 'TESTS:\runtime\test_index_error.py'.

   24| a = list(range(40))
   25| b = tuple(range(50))
   26| try:
-->27|     print(a[60], b[0])
                 ^^^^^
   28| except IndexError as e:

        a:  [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, ...]
            len(a): 40

Short tuple

Traceback (most recent call last):
  File "TESTS:\runtime\test_index_error.py", line 10, in test_Short_tuple
    print(a[3], b[2])
IndexError: tuple index out of range

    Remember: the first item of a `tuple` is not at index 1 but at index 0.

An `IndexError` occurs when you try to get an item from a list,
a tuple, or a similar object (sequence), and use an index which
does not exist; typically, this happens because the index you give
is greater than the length of the sequence.

You have tried to get the item with index `3` of `a`,
a `tuple` of length `3`.
The valid index values of `a` are integers ranging from
`-3` to `2`.

Exception raised on line `10` of file 'TESTS:\runtime\test_index_error.py'.

    7| a = (1, 2, 3)
    8| b = [1, 2, 3]
    9| try:
-->10|     print(a[3], b[2])
                 ^^^^
   11| except IndexError as e:

        a:  (1, 2, 3)

KeyError

ChainMap

Traceback (most recent call last):
  File "PYTHON_LIB:\collections\__init__.py", line 1056, in pop
    return self.maps[0].pop(key, *args)
KeyError: 42

    During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "TESTS:\runtime\test_key_error.py", line 65, in test_ChainMap
    d.pop(42)
KeyError: 'Key not found in the first mapping: 42'

A `KeyError` is raised when a value is not found as a
key in a Python dict or in a similar object.

The key `42` cannot be found in `d`, an object of type `ChainMap`.

Exception raised on line `65` of file 'TESTS:\runtime\test_key_error.py'.

   62| from collections import ChainMap
   63| d = ChainMap({}, {})
   64| try:
-->65|     d.pop(42)
           ^^^^^^^^^
   66| except KeyError as e:

        d:  ChainMap({}, {})
        d.pop:  <bound method ChainMap.pop> of ChainMap({}, {})

Forgot to convert to string

Traceback (most recent call last):
  File "TESTS:\runtime\test_key_error.py", line 120, in test_Forgot_to_convert_to_string
    print(squares[2])
KeyError: 2

    Did you forget to convert `2` into a string?

A `KeyError` is raised when a value is not found as a
key in a Python dict or in a similar object.

The key `2` cannot be found in the dict `squares`.
`squares` contains a string key which is identical to `str(2)`.
Perhaps you forgot to convert the key into a string.

Exception raised on line `120` of file 'TESTS:\runtime\test_key_error.py'.

   117| def test_Forgot_to_convert_to_string():
   118|     squares = {"1": 1, "2": 4, "3": 9}
   119|     try:
-->120|         print(squares[2])
                      ^^^^^^^^^^
   121|     except KeyError as e:

        squares:  {'1': 1, '2': 4, '3': 9}

Generic key error

Traceback (most recent call last):
  File "TESTS:\runtime\test_key_error.py", line 46, in test_Generic_key_error
    d["c"]
KeyError: 'c'

A `KeyError` is raised when a value is not found as a
key in a Python dict or in a similar object.

The key `'c'` cannot be found in the dict `d`.

Exception raised on line `46` of file 'TESTS:\runtime\test_key_error.py'.

   43| def test_Generic_key_error():
   44|     d = {"a": 1, "b": 2}
   45|     try:
-->46|         d["c"]
               ^^^^^^
   47|     except KeyError as e:

        d:  {'a': 1, 'b': 2}

Popitem empty ChainMap

Traceback (most recent call last):
  File "PYTHON_LIB:\collections\__init__.py", line 1049, in popitem
    return self.maps[0].popitem()
KeyError: 'popitem(): dictionary is empty'

    During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "TESTS:\runtime\test_key_error.py", line 27, in test_Popitem_empty_ChainMap
    alpha.popitem()
KeyError: 'No keys found in the first mapping.'

    `alpha` is an empty `ChainMap`.

A `KeyError` is raised when a value is not found as a
key in a Python dict or in a similar object.

You tried to retrieve an item from `alpha` which is an empty `ChainMap`.

Exception raised on line `27` of file 'TESTS:\runtime\test_key_error.py'.

   24| from collections import ChainMap
   25| alpha = ChainMap({}, {})
   26| try:
-->27|     alpha.popitem()
           ^^^^^^^^^^^^^^^
   28| except KeyError as e:

        alpha:  ChainMap({}, {})
        alpha.popitem:  <bound method ChainMap.popitem> of ChainMap({}, {})

Popitem empty dict

Traceback (most recent call last):
  File "TESTS:\runtime\test_key_error.py", line 8, in test_Popitem_empty_dict
    d.popitem()
KeyError: 'popitem(): dictionary is empty'

    `d` is an empty `dict`.

A `KeyError` is raised when a value is not found as a
key in a Python dict or in a similar object.

You tried to retrieve an item from `d` which is an empty `dict`.

Exception raised on line `8` of file 'TESTS:\runtime\test_key_error.py'.

   5| def test_Popitem_empty_dict():
   6|     d = {}
   7|     try:
-->8|         d.popitem()
              ^^^^^^^^^^^
   9|     except KeyError as e:

        d:  {}
        d.popitem:  <builtin method popitem of dict object>

Similar names

Traceback (most recent call last):
  File "TESTS:\runtime\test_key_error.py", line 151, in test_Similar_names
    a = second["alpha"]
KeyError: 'alpha'

    Did you mean `'alpha0'`?

A `KeyError` is raised when a value is not found as a
key in a Python dict or in a similar object.

The key `'alpha'` cannot be found in the dict `second`.
`second` has some keys similar to `'alpha'` including:
`'alpha0', 'alpha11', 'alpha12'`.

Exception raised on line `151` of file 'TESTS:\runtime\test_key_error.py'.

   147|     assert ok, diff
   148|
   149| second = {"alpha0": 1, "alpha11": 2, "alpha12": 3}
   150| try:
-->151|     a = second["alpha"]
                ^^^^^^^^^^^^^^^
   152| except KeyError as e:

        second:  {'alpha0': 1, 'alpha11': 2, 'alpha12': 3}

String by mistake

Traceback (most recent call last):
  File "TESTS:\runtime\test_key_error.py", line 102, in test_String_by_mistake
    d["(0, 0)"]
KeyError: '(0, 0)'

    Did you convert `(0, 0)` into a string by mistake?

A `KeyError` is raised when a value is not found as a
key in a Python dict or in a similar object.

The key `'(0, 0)'` cannot be found in the dict `d`.
`'(0, 0)'` is a string.
There is a key of `d` whose string representation
is identical to `'(0, 0)'`.

Exception raised on line `102` of file 'TESTS:\runtime\test_key_error.py'.

    98| chain_map_string_by_mistake()  # do not show in docs
    99|
   100| d = {(0, 0): "origin"}
   101| try:
-->102|     d["(0, 0)"]
            ^^^^^^^^^^^
   103| except KeyError as e:

        d:  {(0, 0): 'origin'}

LookupError

Generic

Traceback (most recent call last):
  File "TESTS:\runtime\test_lookup_error.py", line 10, in test_Generic
    raise LookupError("Fake message")
LookupError: Fake message

`LookupError` is the base class for the exceptions that are raised
when a key or index used on a mapping or sequence is invalid.
It can also be raised directly by codecs.lookup().

Exception raised on line `10` of file 'TESTS:\runtime\test_lookup_error.py'.

    4| def test_Generic():
    5|     try:
    6|         # LookupError is the base class for KeyError and IndexError.
    7|         # It should normally not be raised by user code,
    8|         # other than possibly codecs.lookup(), which is why we raise
    9|         # it directly here for our example.
-->10|         raise LookupError("Fake message")
   11|     except LookupError as e:

        LookupError:  <class LookupError>

ModuleNotFoundError

Need to install module

Traceback (most recent call last):
  File "TESTS:\runtime\test_module_not_found_error.py", line 80, in test_Need_to_install_module
    import alphabet
ModuleNotFoundError: No module named 'alphabet'

A `ModuleNotFoundError` exception indicates that you
are trying to import a module that cannot be found by Python.
This could be because you misspelled the name of the module
or because it is not installed on your computer.

No module named `alphabet` can be imported.
Perhaps you need to install it.

Exception raised on line `80` of file 'TESTS:\runtime\test_module_not_found_error.py'.

   78| def test_Need_to_install_module():
   79|     try:
-->80|         import alphabet
   81|     except ModuleNotFoundError as e:

Not a package

Traceback (most recent call last):
  File "TESTS:\runtime\test_module_not_found_error.py", line 23, in test_Not_a_package
    import os.xxx
ModuleNotFoundError: No module named 'os.xxx'; 'os' is not a package

A `ModuleNotFoundError` exception indicates that you
are trying to import a module that cannot be found by Python.
This could be because you misspelled the name of the module
or because it is not installed on your computer.

`xxx` cannot be imported from `os`.

Exception raised on line `23` of file 'TESTS:\runtime\test_module_not_found_error.py'.

   20| def test_Not_a_package():
   21|
   22|     try:
-->23|         import os.xxx
   24|     except ModuleNotFoundError as e:

Not a package similar name

Traceback (most recent call last):
  File "TESTS:\runtime\test_module_not_found_error.py", line 37, in test_Not_a_package_similar_name
    import os.pathh
ModuleNotFoundError: No module named 'os.pathh'; 'os' is not a package

    Did you mean `import os.path`?

A `ModuleNotFoundError` exception indicates that you
are trying to import a module that cannot be found by Python.
This could be because you misspelled the name of the module
or because it is not installed on your computer.

Perhaps you meant `import os.path`.
`path` is a name similar to `pathh` and is a module that
can be imported from `os`.

Exception raised on line `37` of file 'TESTS:\runtime\test_module_not_found_error.py'.

   35| def test_Not_a_package_similar_name():
   36|     try:
-->37|         import os.pathh
   38|     except ModuleNotFoundError as e:

Object not module

Traceback (most recent call last):
  File "TESTS:\runtime\test_module_not_found_error.py", line 51, in test_Object_not_module
    import os.open
ModuleNotFoundError: No module named 'os.open'; 'os' is not a package

    Did you mean `from os import open`?

A `ModuleNotFoundError` exception indicates that you
are trying to import a module that cannot be found by Python.
This could be because you misspelled the name of the module
or because it is not installed on your computer.

`open` is not a separate module but an object that is part of `os`.

Exception raised on line `51` of file 'TESTS:\runtime\test_module_not_found_error.py'.

   49| def test_Object_not_module():
   50|     try:
-->51|         import os.open
   52|     except ModuleNotFoundError as e:

        open:  <builtin function open>

Similar object not module

Traceback (most recent call last):
  File "TESTS:\runtime\test_module_not_found_error.py", line 65, in test_Similar_object_not_module
    import os.opend
ModuleNotFoundError: No module named 'os.opend'; 'os' is not a package

    Did you mean `from os import open`?

A `ModuleNotFoundError` exception indicates that you
are trying to import a module that cannot be found by Python.
This could be because you misspelled the name of the module
or because it is not installed on your computer.

Perhaps you meant `from os import open`.
`open` is a name similar to `opend` and is an object that
can be imported from `os`.
Other objects with similar names that are part of
 `os` include `popen`.

Exception raised on line `65` of file 'TESTS:\runtime\test_module_not_found_error.py'.

   63| def test_Similar_object_not_module():
   64|     try:
-->65|         import os.opend
   66|     except ModuleNotFoundError as e:

Standard library module

Traceback (most recent call last):
  File "TESTS:\runtime\test_module_not_found_error.py", line 7, in test_Standard_library_module
    import Tkinter
ModuleNotFoundError: No module named 'Tkinter'

    Did you mean `tkinter`?

A `ModuleNotFoundError` exception indicates that you
are trying to import a module that cannot be found by Python.
This could be because you misspelled the name of the module
or because it is not installed on your computer.

No module named `Tkinter` can be imported.
Perhaps you need to install it.
The following existing modules have names that are similar
to the module you tried to import: `tkinter, _tkinter`

Exception raised on line `7` of file 'TESTS:\runtime\test_module_not_found_error.py'.

   5| def test_Standard_library_module():
   6|     try:
-->7|         import Tkinter
   8|     except ModuleNotFoundError as e:

no curses

Traceback (most recent call last):
  File "TESTS:\runtime\test_module_not_found_error.py", line 97, in test_no_curses
    import curses
ModuleNotFoundError: No module named '_curses'

    The curses module is rarely installed with Python on Windows.

A `ModuleNotFoundError` exception indicates that you
are trying to import a module that cannot be found by Python.
This could be because you misspelled the name of the module
or because it is not installed on your computer.

You have tried to import the curses module.
The curses module is rarely installed with Python on Windows.

Exception raised on line `97` of file 'TESTS:\runtime\test_module_not_found_error.py'.

   95| def test_no_curses():
   96|     try:
-->97|         import curses
   98|     except ModuleNotFoundError as e:

NameError

Annotated variable

Traceback (most recent call last):
  File "TESTS:\runtime\test_name_error.py", line 31, in test_Annotated_variable
    y = x
NameError: name 'x' is not defined

    Did you use a colon instead of an equal sign?

A `NameError` exception indicates that a variable or
function name is not known to Python.
Most often, this is because there is a spelling mistake.
However, sometimes it is because the name is used
before being defined or given a value.

In your program, no object with the name `x` exists.
A type hint found for `x` in the global scope.
Perhaps you had used a colon instead of an equal sign and wrote

    x : 3

instead of

    x = 3

Exception raised on line `31` of file 'TESTS:\runtime\test_name_error.py'.

   29| def test_Annotated_variable():
   30|     try:
-->31|         y = x
                   ^
   32|     except NameError as e:

Custom name

Traceback (most recent call last):
  File "TESTS:\runtime\test_name_error.py", line 234, in test_Custom_name
    python
NameError: name 'python' is not defined

    You are already using Python!
A `NameError` exception indicates that a variable or
function name is not known to Python.
Most often, this is because there is a spelling mistake.
However, sometimes it is because the name is used
before being defined or given a value.

You are already using Python!
Exception raised on line `234` of file 'TESTS:\runtime\test_name_error.py'.

   232| def test_Custom_name():
   233|     try:
-->234|         python
                ^^^^^^
   235|     except NameError as e:

Free variable referenced

Traceback (most recent call last):
  File "TESTS:\runtime\test_name_error.py", line 217, in test_Free_variable_referenced
    outer()
  File "TESTS:\runtime\test_name_error.py", line 213, in outer
    inner()
  File "TESTS:\runtime\test_name_error.py", line 212, in inner
    return var
NameError: free variable 'var' referenced before assignment in enclosing scope. Did you mean: 'vars'?

A `NameError` exception indicates that a variable or
function name is not known to Python.
Most often, this is because there is a spelling mistake.
However, sometimes it is because the name is used
before being defined or given a value.

In your program, `var` is an unknown name
that exists in an enclosing scope,
but has not yet been assigned a value.

Execution stopped on line `217` of file 'TESTS:\runtime\test_name_error.py'.

   213|     inner()
   214|     var = 4
   215|
   216| try:
-->217|     outer()
            ^^^^^^^
   218| except NameError as e:

        outer:  <function outer>
            defined in <function test_Free_variable_referenced>

Exception raised on line `212` of file 'TESTS:\runtime\test_name_error.py'.

   211| def inner():
-->212|     return var
                   ^^^

Generic

Traceback (most recent call last):
  File "TESTS:\runtime\test_name_error.py", line 15, in test_Generic
    this = something
NameError: name 'something' is not defined

A `NameError` exception indicates that a variable or
function name is not known to Python.
Most often, this is because there is a spelling mistake.
However, sometimes it is because the name is used
before being defined or given a value.

In your program, no object with the name `something` exists.
I have no additional information for you.

Exception raised on line `15` of file 'TESTS:\runtime\test_name_error.py'.

   13| def test_Generic():
   14|     try:
-->15|         this = something
                      ^^^^^^^^^
   16|     except NameError as e:

Missing import

Traceback (most recent call last):
  File "TESTS:\runtime\test_name_error.py", line 138, in test_Missing_import
    unicodedata.something
NameError: name 'unicodedata' is not defined

    Did you forget to import `unicodedata`?

A `NameError` exception indicates that a variable or
function name is not known to Python.
Most often, this is because there is a spelling mistake.
However, sometimes it is because the name is used
before being defined or given a value.


The name `unicodedata` is not defined in your program.
Perhaps you forgot to import `unicodedata` which is found
in Python's standard library.


Exception raised on line `138` of file 'TESTS:\runtime\test_name_error.py'.

   134| if friendly_traceback.get_lang() == "en":
   135|     assert "I have no additional information for you." in result
   136|
   137| try:
-->138|     unicodedata.something
            ^^^^^^^^^^^
   139| except NameError as e:

Missing module name

Traceback (most recent call last):
  File "TESTS:\runtime\test_name_error.py", line 320, in test_Missing_module_name
    frame = Frame()
NameError: name 'Frame' is not defined. Did you mean: 'frame'?

    Did you forget to add `tkinter.`?

A `NameError` exception indicates that a variable or
function name is not known to Python.
Most often, this is because there is a spelling mistake.
However, sometimes it is because the name is used
before being defined or given a value.

In your program, no object with the name `Frame` exists.

The global object `tkinter`
has an attribute named `Frame`.
Perhaps you should have written `tkinter.Frame`
instead of `Frame`.

`Frame` is a name found in the following modules:
tkinter, tracemalloc.
Perhaps you forgot to import `Frame` from one of these modules.

Exception raised on line `320` of file 'TESTS:\runtime\test_name_error.py'.

   317| @pytest.mark.skipif(not tkinter, reason="tkinter not present; likely MacOS")
   318| def test_Missing_module_name():
   319|     try:
-->320|         frame = Frame()
                        ^^^^^
   321|     except NameError as e:

Missing self 1

Traceback (most recent call last):
  File "TESTS:\runtime\test_name_error.py", line 270, in test_Missing_self_1
    str(a)
  File "TESTS:\runtime\test_name_error.py", line 261, in __str__
    toys_list = add_toy(  # ensure that it can see 'self' on following line
NameError: name 'add_toy' is not defined

    Did you write `self` at the wrong place?

A `NameError` exception indicates that a variable or
function name is not known to Python.
Most often, this is because there is a spelling mistake.
However, sometimes it is because the name is used
before being defined or given a value.

In your program, no object with the name `add_toy` exists.

The local object `<Pet object> defined in <function test_name_error.test_Missing_self_1>`
has an attribute named `add_toy`.
Perhaps you should have written `self.add_toy(...`
instead of `add_toy(self, ...`.

Execution stopped on line `270` of file 'TESTS:\runtime\test_name_error.py'.

   266|             return "{} has no toys".format(self.name)
   267|
   268| a = Pet('Fido')
   269| try:
-->270|     str(a)
            ^^^^^^
   271| except NameError as e:

        a:  <Pet object>
            defined in <function test_name_error.test_Missing_self_1>
        str:  <class str>

Exception raised on line `261` of file 'TESTS:\runtime\test_name_error.py'.

   259| def __str__(self):
   260|     # self at the wrong place
-->261|     toys_list = add_toy(  # ensure that it can see 'self' on following line
                        ^^^^^^^
   262|                         self, 'something')
   263|     if self.toys:

Missing self 2

Traceback (most recent call last):
  File "TESTS:\runtime\test_name_error.py", line 305, in test_Missing_self_2
    str(a)
  File "TESTS:\runtime\test_name_error.py", line 297, in __str__
    toys_list = add_toy('something')
NameError: name 'add_toy' is not defined

    Did you forget to add `self.`?

A `NameError` exception indicates that a variable or
function name is not known to Python.
Most often, this is because there is a spelling mistake.
However, sometimes it is because the name is used
before being defined or given a value.

In your program, no object with the name `add_toy` exists.

A local object, `<Pet object> defined in <function test_name_error.test_Missing_self_2>`,
has an attribute named `add_toy`.
Perhaps you should have written `self.add_toy`
instead of `add_toy`.

Execution stopped on line `305` of file 'TESTS:\runtime\test_name_error.py'.

   301|             return "{} has no toys".format(self.name)
   302|
   303| a = Pet('Fido')
   304| try:
-->305|     str(a)
            ^^^^^^
   306| except NameError as e:

        a:  <Pet object>
            defined in <function test_name_error.test_Missing_self_2>
        str:  <class str>

Exception raised on line `297` of file 'TESTS:\runtime\test_name_error.py'.

   295| def __str__(self):
   296|     # Missing self.
-->297|     toys_list = add_toy('something')
                        ^^^^^^^
   298|     if self.toys:

Synonym

Traceback (most recent call last):
  File "TESTS:\runtime\test_name_error.py", line 97, in test_Synonym
    cost  # wrote from math import * above
NameError: name 'cost' is not defined. Did you mean: 'cos'?

    Did you mean `cos`?

A `NameError` exception indicates that a variable or
function name is not known to Python.
Most often, this is because there is a spelling mistake.
However, sometimes it is because the name is used
before being defined or given a value.

In your program, no object with the name `cost` exists.
Instead of writing `cost`, perhaps you meant one of the following:
*   Global scope: `cos`, `cosh`

Exception raised on line `97` of file 'TESTS:\runtime\test_name_error.py'.

   93| if friendly_traceback.get_lang() == "en":
   94|     assert "The Python builtin `chr` has a similar name." in result
   95|
   96| try:
-->97|     cost  # wrote from math import * above
           ^^^^
   98| except NameError as e:

missing import2

Traceback (most recent call last):
  File "TESTS:\runtime\test_name_error.py", line 153, in test_missing_import2
    ABCMeta
NameError: name 'ABCMeta' is not defined

A `NameError` exception indicates that a variable or
function name is not known to Python.
Most often, this is because there is a spelling mistake.
However, sometimes it is because the name is used
before being defined or given a value.

In your program, no object with the name `ABCMeta` exists.
`ABCMeta` is a name found in the following modules:
selectors, typing, abc, numbers.
Perhaps you forgot to import `ABCMeta` from one of these modules.

Exception raised on line `153` of file 'TESTS:\runtime\test_name_error.py'.

   151| def test_missing_import2():
   152|     try:
-->153|         ABCMeta
                ^^^^^^^
   154|     except NameError as e:

missing import3

Traceback (most recent call last):
  File "TESTS:\runtime\test_name_error.py", line 168, in test_missing_import3
    AF_APPLETALK
NameError: name 'AF_APPLETALK' is not defined

A `NameError` exception indicates that a variable or
function name is not known to Python.
Most often, this is because there is a spelling mistake.
However, sometimes it is because the name is used
before being defined or given a value.

In your program, no object with the name `AF_APPLETALK` exists.
`AF_APPLETALK` is a name found in module `socket`.
Perhaps you forgot to write

    from socket import AF_APPLETALK

Exception raised on line `168` of file 'TESTS:\runtime\test_name_error.py'.

   166| def test_missing_import3():
   167|     try:
-->168|         AF_APPLETALK
                ^^^^^^^^^^^^
   169|     except NameError as e:

missing import from other 1

Traceback (most recent call last):
  File "TESTS:\runtime\test_name_error.py", line 183, in test_missing_import_from_other_1
    plt.something
NameError: name 'plt' is not defined

    Did you forget to import `matplotlib.pyplot`?

A `NameError` exception indicates that a variable or
function name is not known to Python.
Most often, this is because there is a spelling mistake.
However, sometimes it is because the name is used
before being defined or given a value.


The name `plt` is not defined in your program.
Perhaps you forgot to write

    import matplotlib.pyplot as plt


Exception raised on line `183` of file 'TESTS:\runtime\test_name_error.py'.

   180| def test_missing_import_from_other_1():
   181|     friendly_traceback.add_other_module_names_synonyms({"plt": "matplotlib.pyplot"})
   182|     try:
-->183|         plt.something
                ^^^
   184|     except NameError as e:

missing import from other 2

Traceback (most recent call last):
  File "TESTS:\runtime\test_name_error.py", line 197, in test_missing_import_from_other_2
    show()
NameError: name 'show' is not defined

A `NameError` exception indicates that a variable or
function name is not known to Python.
Most often, this is because there is a spelling mistake.
However, sometimes it is because the name is used
before being defined or given a value.

In your program, no object with the name `show` exists.
`show` is a name found in the following modules:
mailcap, matplotlib.pyplot, funny.
Perhaps you forgot to import `show` from one of these modules.

Exception raised on line `197` of file 'TESTS:\runtime\test_name_error.py'.

   194| def test_missing_import_from_other_2():
   195|     friendly_traceback.add_other_attribute_names({"show": ["matplotlib.pyplot", "funny"] })
   196|     try:
-->197|         show()
                ^^^^
   198|     except NameError as e:

special keyword

Traceback (most recent call last):
  File "TESTS:\runtime\test_name_error.py", line 352, in test_special_keyword
    brek
NameError: name 'brek' is not defined

    Did you mean `break`?

A `NameError` exception indicates that a variable or
function name is not known to Python.
Most often, this is because there is a spelling mistake.
However, sometimes it is because the name is used
before being defined or given a value.

I suspect you meant to write the keyword `break` and made a typo.

Exception raised on line `352` of file 'TESTS:\runtime\test_name_error.py'.

   349| if friendly_traceback.get_lang() == "en":
   350|     assert "Did you mean `continue`" in result
   351| try:
-->352|     brek
            ^^^^
   353| except NameError as e:

OsError

Urllib error

Traceback (most recent call last):
  File "PYTHON_LIB:\urllib\request.py", line 1348, in do_open
       ... More lines not shown. ...
  File "PYTHON_LIB:\socket.py", line 824, in create_connection
    for res in getaddrinfo(host, port, 0, SOCK_STREAM):
  File "PYTHON_LIB:\socket.py", line 955, in getaddrinfo
    for res in _socket.getaddrinfo(host, port, family, type, proto, flags):
socket.gaierror: [Errno 11001] getaddrinfo failed

    During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "TESTS:\runtime\test_os_error.py", line 10, in test_Urllib_error
    request.urlopen("http://does_not_exist")
URLError: <urlopen error [Errno 11001] getaddrinfo failed>

An exception of type `URLError` is a subclass of `OSError`.
Nothing more specific is known about `URLError`.

An `OSError` exception is usually raised by the Operating System
to indicate that an operation is not allowed or that
a resource is not available.

I suspect that you are trying to connect to a server and
that a connection cannot be made.

If that is the case, check for typos in the URL
and check your internet connectivity.

Exception raised on line `10` of file 'TESTS:\runtime\test_os_error.py'.

    6| @pytest.mark.skipif(random.randint(0, 50) < 59, reason="very long test")
    7| def test_Urllib_error():
    8|     from urllib import request, error
    9|     try:
-->10|         request.urlopen("http://does_not_exist")
               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
   11|     except error.URLError as e:

        request:  <module urllib.request> from PYTHON_LIB:\urllib\request.py
        request.urlopen:  <function urlopen>

invalid argument

Traceback (most recent call last):
  File "TESTS:\runtime\test_os_error.py", line 50, in test_invalid_argument
    open("c:\test.txt")
OSError: [Errno 22] Invalid argument: 'c:\test.txt'

    Perhaps you need to double the backslash characters.

An `OSError` exception is usually raised by the Operating System
to indicate that an operation is not allowed or that
a resource is not available.

I suspect that you wrote a filename or path that contains
at least one backslash character, `\`.
Python likely interpreted this as indicating the beginning of
what is known as an escape sequence.
To solve the problem, either write a so-called 'raw string'
by adding the letter `r` as a prefix in
front of the filename or path, or replace all single backslash
characters, `\`, by double ones: `\\`.

Exception raised on line `50` of file 'TESTS:\runtime\test_os_error.py'.

   47| if os.name != "nt":
   48|     return "Windows test only", "No result"
   49| try:
-->50|     open("c:\test.txt")
           ^^^^^^^^^^^^^^^^^^^
   51| except OSError as e:

        open:  <builtin function open>

no information

Traceback (most recent call last):
  File "TESTS:\runtime\test_os_error.py", line 30, in test_no_information
    raise OSError("Some unknown message")
OSError: Some unknown message

    Friendly-traceback does not know the cause of this error.

An `OSError` exception is usually raised by the Operating System
to indicate that an operation is not allowed or that
a resource is not available.

No information is known about this exception.
Please report this example to
https://github.com/friendly-traceback/friendly-traceback/issues/new
If you are using a REPL, use `www('bug')` to do so.

If you are using the Friendly console, use `www()` to
do an Internet search for this particular case.

Exception raised on line `30` of file 'TESTS:\runtime\test_os_error.py'.

   27| old_debug = friendly_traceback.debug_helper.DEBUG
   28| friendly_traceback.debug_helper.DEBUG = False
   29| try:
-->30|     raise OSError("Some unknown message")
   31| except OSError as e:

        OSError:  <class OSError>

OverflowError

Generic

Traceback (most recent call last):
  File "TESTS:\runtime\test_overflow_error.py", line 6, in test_Generic
    2.0 ** 1600
OverflowError: (34, 'Result too large')

An `OverflowError` is raised when the result of an arithmetic operation
is too large to be handled by the computer's processor.

Exception raised on line `6` of file 'TESTS:\runtime\test_overflow_error.py'.

   4| def test_Generic():
   5|     try:
-->6|         2.0 ** 1600
              ^^^^^^^^^^^
   7|     except OverflowError as e:

Huge lenght

Traceback (most recent call last):
  File "TESTS:\runtime\test_overflow_error.py", line 25, in test_Huge_lenght
    len(huge)
OverflowError: Python int too large to convert to C ssize_t

An `OverflowError` is raised when the result of an arithmetic operation
is too large to be handled by the computer's processor.

Exception raised on line `25` of file 'TESTS:\runtime\test_overflow_error.py'.

   22| def test_Huge_lenght():
   23|     huge = range(1<<10000)
   24|     try:
-->25|         len(huge)
               ^^^^^^^^^
   26|     except OverflowError as e:

        huge:  range(0, ...)
               len(huge): Object too large to be processed by Python.

        len:  <builtin function len>

RecursionError

Generic

Traceback (most recent call last):
  File "TESTS:\runtime\test_recursion_error.py", line 8, in test_Generic
    a()
       ... More lines not shown. ...
  File "TESTS:\runtime\test_recursion_error.py", line 6, in a
    return a()
  File "TESTS:\runtime\test_recursion_error.py", line 6, in a
    return a()
RecursionError: maximum recursion depth exceeded

A `RecursionError` is raised when a function calls itself,
directly or indirectly, too many times.
It almost always indicates that you made an error in your code
and that your program would never stop.

Execution stopped on line `8` of file 'TESTS:\runtime\test_recursion_error.py'.

   5| def a():
   6|     return a()
   7| try:
-->8|     a()
          ^^^
   9| except RecursionError as e:

        a:  <function a> defined in <function test_Generic>

Exception raised on line `6` of file 'TESTS:\runtime\test_recursion_error.py'.

   5| def a():
-->6|     return a()
                 ^^^

        a:  <function a> defined in <function test_Generic>

TypeError

Argument of object is not iterable

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 843, in test_Argument_of_object_is_not_iterable
    a in b
TypeError: argument of type 'object' is not iterable

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

An iterable is an object capable of returning its members one at a time.
Python containers (`list, tuple, dict`, etc.) are iterables.
'b' is not a container. A container is required here.

Exception raised on line `843` of file 'TESTS:\runtime\test_type_error.py'.

   840| a = object()
   841| b = object()
   842| try:
-->843|     a in b
            ^^^^^^
   844| except TypeError as e:

        a:  <object object>
        b:  <object object>

Bad type for unary operator

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 427, in test_Bad_type_for_unary_operator
    a =+ "def"
TypeError: bad operand type for unary +: 'str'

    Perhaps you meant to write `+=` instead of `=+`
A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

You tried to use the unary operator '+'
with the following type of object: a string (`str`).
This operation is not defined for this type of object.

Perhaps you meant to write `+=` instead of `=+`

Exception raised on line `427` of file 'TESTS:\runtime\test_type_error.py'.

   422|     assert "You tried to use the unary operator '~'" in result
   423|
   424| try:
   425|     # fmt: off
   426|     a = "abc"
-->427|     a =+ "def"
               ^^^^^^^
   428|     # fmt: on

Builtin has no len

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 901, in test_Builtin_has_no_len
    len("Hello world".split)
TypeError: object of type 'builtin_function_or_method' has no len()

    Did you forget to call `"Hello world".split`?

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

I suspect that you forgot to add parentheses to call `"Hello world".split`.
You might have meant to write:
`len("Hello world".split())`

Exception raised on line `901` of file 'TESTS:\runtime\test_type_error.py'.

   899| def test_Builtin_has_no_len():
   900|     try:
-->901|         len("Hello world".split)
                ^^^^^^^^^^^^^^^^^^^^^^^^
   902|     except TypeError as e:

        len:  <builtin function len>
        "Hello world".split:  <builtin method split of str object>

Can only concatenate

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 39, in test_Can_only_concatenate
    result = a_tuple + a_list
TypeError: can only concatenate tuple (not "list") to tuple

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

You tried to concatenate (add) two different types of objects:
a `tuple` and a `list`.

Exception raised on line `39` of file 'TESTS:\runtime\test_type_error.py'.

   36| try:
   37|     a_tuple = (1, 2, 3)
   38|     a_list = [1, 2, 3]
-->39|     result = a_tuple + a_list
                    ^^^^^^^^^^^^^^^^
   40| except TypeError as e:

        a_list:  [1, 2, 3]
        a_tuple:  (1, 2, 3)

Cannot convert dictionary update sequence

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 886, in test_Cannot_convert_dictionary_update_sequence
    dd.update([1, 2, 3])
TypeError: cannot convert dictionary update sequence element #0 to a sequence

    Perhaps you need to use the `dict.fromkeys()` method.

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

`dict.update()` does not accept a sequence as an argument.
Instead of writing `dd.update([1, 2, 3])`
perhaps you should use the `dict.fromkeys()` method: `dd.update( dict.fromkeys([1, 2, 3]) )`.

Exception raised on line `886` of file 'TESTS:\runtime\test_type_error.py'.

   882|     assert "you should use the `dict.fromkeys()`" in result
   883|
   884| dd = {"a": "a"}
   885| try:
-->886|     dd.update([1, 2, 3])
            ^^^^^^^^^^^^^^^^^^^^
   887| except TypeError as e:

        dd:  {'a': 'a'}
        dd.update:  <builtin method update of dict object>

Cannot multiply by non int

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 652, in test_Cannot_multiply_by_non_int
    "a" * "2"
TypeError: can't multiply sequence by non-int of type 'str'

    Did you forget to convert `"2"` into an integer?

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

You can only multiply sequences, such as list, tuples,
 strings, etc., by integers.
Perhaps you forgot to convert `"2"` into an integer.

Exception raised on line `652` of file 'TESTS:\runtime\test_type_error.py'.

   648| if friendly_traceback.get_lang() == "en":
   649|     assert "Did you forget to convert `c` into an integer?" in result
   650|
   651| try:
-->652|     "a" * "2"
            ^^^^^^^^^
   653| except TypeError as e:

Cannot unpack non iterable object

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 857, in test_Cannot_unpack_non_iterable_object
    a, b = 42.0
TypeError: cannot unpack non-iterable float object

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

Unpacking is a convenient way to assign a name,
to each item of an iterable.
An iterable is an object capable of returning its members one at a time.
Python containers (`list, tuple, dict`, etc.) are iterables,
but not objects of type `float`.

Exception raised on line `857` of file 'TESTS:\runtime\test_type_error.py'.

   855| def test_Cannot_unpack_non_iterable_object():
   856|     try:
-->857|         a, b = 42.0
   858|     except TypeError as e:

Cant mod complex numbers

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 54, in test_Cant_mod_complex_numbers
    3 + 3j % 2
TypeError: unsupported operand type(s) for %: 'complex' and 'int'

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

You cannot use complex numbers with the modulo operator `%`.

Exception raised on line `54` of file 'TESTS:\runtime\test_type_error.py'.

   52| def test_Cant_mod_complex_numbers():
   53|     try:
-->54|         3 + 3j % 2
                   ^^^^^^
   55|     except TypeError as e:

Comparison not supported

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 375, in test_Comparison_not_supported
    b >= a
TypeError: '>=' not supported between instances of 'int' and 'str'

    Did you forget to convert the string `a` into an integer (`int`)?

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

You tried to do an order comparison (>=)
between two incompatible types of objects:
an integer (`int`) and a string (`str`).
Perhaps you forgot to convert the string `a` into an integer (`int`).

Exception raised on line `375` of file 'TESTS:\runtime\test_type_error.py'.

   372| try:
   373|     a = "2"
   374|     b = 42
-->375|     b >= a
            ^^^^^^
   376| except TypeError as e:

        a:  '2'
        b:  42

Derive from BaseException

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 594, in test_Derive_from_BaseException
    raise "exception"  # noqa
TypeError: exceptions must derive from BaseException

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

Exceptions must be derived from `BaseException`.
It is recommended that user-defined exceptions derive from
`Exception`, a subclass of `BaseException`.

Exception raised on line `594` of file 'TESTS:\runtime\test_type_error.py'.

   590| if friendly_traceback.get_lang() == "en":
   591|     assert "you must only have classes that derive from `BaseException`" in result
   592|
   593| try:
-->594|     raise "exception"  # noqa
   595| except TypeError as e:

Generator has no len

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 1062, in test_Generator_has_no_len
    nb = len(letter
TypeError: object of type 'generator' has no len()

    You likely need to build a list first.

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

I am guessing that you were trying to count the number of elements
produced by a generator expression. You first need to capture them
in a list:

    len([letter                 for letter in "word"])

Exception raised on line `1062` of file 'TESTS:\runtime\test_type_error.py'.

   1060| def test_Generator_has_no_len():
   1061|     try:
-->1062|         nb = len(letter
                      ^^^^^^^^^^
   1063|                  for letter in "word")
                          ^^^^^^^^^^^^^^^^^^^^^
   1064|     except TypeError as e:

        len:  <builtin function len>

Indices must be integers or slices

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 736, in test_Indices_must_be_integers_or_slices
    [1, 2, 3]["2"]
TypeError: list indices must be integers or slices, not str

    Did you forget to convert `"2"` into an integer?

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

In the expression `[1, 2, 3]["2"]`
what is included between the square brackets, `[...]`,
must be either an integer or a slice
(`start:stop` or `start:stop:step`)
and you have used a string (`str`) instead.

Perhaps you forgot to convert `"2"` into an integer.

Exception raised on line `736` of file 'TESTS:\runtime\test_type_error.py'.

   732| if friendly_traceback.get_lang() == "en":
   733|     assert "Perhaps you forgot to convert `2.0` into an integer." in result
   734|
   735| try:
-->736|     [1, 2, 3]["2"]
            ^^^^^^^^^^^^^^
   737| except TypeError as e:

Not an integer

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 698, in test_Not_an_integer
    range(c, d)
TypeError: 'str' object cannot be interpreted as an integer

    Did you forget to convert `c, d` into integers?

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

You wrote an object of type `str` where an integer was expected.
Perhaps you forgot to convert `c, d` into integers.
Exception raised on line `698` of file 'TESTS:\runtime\test_type_error.py'.

   694|     assert "Perhaps you forgot to convert `1.0" in result
   695|
   696| c, d = "2", "3"
   697| try:
-->698|     range(c, d)
            ^^^^^^^^^^^
   699| except TypeError as e:

        c:  '2'
        d:  '3'
        range:  <class range>

Not callable

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 561, in test_Not_callable
    _ = [1, 2](a + b)
TypeError: 'list' object is not callable

    Did you mean `[1, 2][a + b]`?

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

Because of the surrounding parenthesis, `(a + b)`
is interpreted by Python as indicating a function call for
`[1, 2]`, which is an object of type `list`
which cannot be called.

However, `[1, 2]` is a sequence.
Perhaps you meant to use `[]` instead of `()` and write
`[1, 2][a + b]`

Exception raised on line `561` of file 'TESTS:\runtime\test_type_error.py'.

   557|     assert "b.a_list[3]" in result
   558|
   559| try:
   560|     a, b = 3, 7
-->561|     _ = [1, 2](a + b)
                ^^^^^^^^^^^^^
   562| except TypeError as e:

        a:  3
        b:  7
        a + b:  10

Object is not iterable

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 826, in test_Object_is_not_iterable
    list(42)
TypeError: 'int' object is not iterable

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

An iterable is an object capable of returning its members one at a time.
Python containers (`list, tuple, dict`, etc.) are iterables.
An iterable is required here.

Exception raised on line `826` of file 'TESTS:\runtime\test_type_error.py'.

   824| def test_Object_is_not_iterable():
   825|     try:
-->826|         list(42)
                ^^^^^^^^
   827|     except TypeError as e:

        list:  <class list>

Object is not subscriptable

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 811, in test_Object_is_not_subscriptable
    a = f[1]
TypeError: 'function' object is not subscriptable

    Did you mean `f(1)`?

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

Subscriptable objects are typically containers from which
you can retrieve item using the notation `[...]`.

Perhaps you meant to write `f(1)`.

Exception raised on line `811` of file 'TESTS:\runtime\test_type_error.py'.

   807| def f():
   808|     pass
   809|
   810| try:
-->811|     a = f[1]
                ^^^^
   812| except TypeError as e:

        f:  <function f>
            defined in <function test_Object_is_not_subscriptable>

Slice indices must be integers or None

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 751, in test_Slice_indices_must_be_integers_or_None
    [1, 2, 3][1.0:2.0]
TypeError: slice indices must be integers or None or have an __index__ method

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

When using a slice to extract a range of elements
from a sequence, that is something like
`[start:stop]` or `[start:stop:step]`
each of `start`, `stop`, `step` must be either an integer, `None`,
or possibly some other object having an `__index__` method.

Exception raised on line `751` of file 'TESTS:\runtime\test_type_error.py'.

   749| def test_Slice_indices_must_be_integers_or_None():
   750|     try:
-->751|         [1, 2, 3][1.0:2.0]
                ^^^^^^^^^^^^^^^^^^
   752|     except TypeError as e:

Too few positional argument

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 500, in test_Too_few_positional_argument
    fn(1)
TypeError: test_Too_few_positional_argument.<locals>.fn() missing 2 required positional arguments: 'b' and 'c'

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

You apparently have called the function 'test_Too_few_positional_argument.<locals>.fn()' with
fewer positional arguments than it requires (2 missing).

Exception raised on line `500` of file 'TESTS:\runtime\test_type_error.py'.

   496| def fn(a, b, c):
   497|     pass
   498|
   499| try:
-->500|     fn(1)
            ^^^^^
   501| except TypeError as e:

        fn:  <function fn>
            defined in <function test_Too_few_positional_argument>

Too many positional argument

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 480, in test_Too_many_positional_argument
    A().f(1)
TypeError: test_Too_many_positional_argument.<locals>.A.f() takes 1 positional argument but 2 were given

    Perhaps you forgot `self` when defining `A.f`.

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

You apparently have called the function `A.f` with
2 positional argument(s) while it requires 1
such positional argument(s).
Perhaps you forgot `self` when defining `A.f`.

Exception raised on line `480` of file 'TESTS:\runtime\test_type_error.py'.

   476|     def f(x):
   477|         pass
   478|
   479| try:
-->480|     A().f(1)
            ^^^^^^^^
   481| except TypeError as e:

        A:  <class A>
            defined in <function test_type_error.test_Too_many_positional_argument>

Tuple no item assignment

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 446, in test_Tuple_no_item_assignment
    a[0] = 0
TypeError: 'tuple' object does not support item assignment

    Did you mean to use a list?

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

In Python, some objects are known as immutable:
once defined, their value cannot be changed.
You tried change part of such an immutable object: a `tuple`,
most likely by using an indexing operation.
Perhaps you meant to use a list instead.

Exception raised on line `446` of file 'TESTS:\runtime\test_type_error.py'.

   443| def test_Tuple_no_item_assignment():
   444|     a = (1, 2, 3)
   445|     try:
-->446|         a[0] = 0
                ^^^^
   447|     except TypeError as e:

        a:  (1, 2, 3)
        a[0]:  1

Unhachable type

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 769, in test_Unhachable_type
    {[1, 2]: 1}
TypeError: unhashable type: 'list'

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

Only hashable objects can be used
as elements of `set` or keys of `dict`.
Hashable objects are objects that do not change value
once they have been created.Instead of using a `list`, consider using a `tuple`.

Exception raised on line `769` of file 'TESTS:\runtime\test_type_error.py'.

   767| def test_Unhachable_type():
   768|     try:
-->769|         {[1, 2]: 1}
   770|     except TypeError as e:

Unsupported operand types

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 325, in test_Unsupported_operand_types
    a @= b
TypeError: unsupported operand type(s) for @=: 'str' and 'int'

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

You tried to use the operator @=
using two incompatible types of objects:
a string (`str`) and an integer (`int`).
This operator is normally used only
for multiplication of matrices.

Exception raised on line `325` of file 'TESTS:\runtime\test_type_error.py'.

   322| try:
   323|     a = "a"
   324|     b = 2
-->325|     a @= b
   326| except TypeError as e:

        a:  'a'
        b:  2

divmod

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 69, in test_divmod
    result = divmod(a, b)
TypeError: unsupported operand type(s) for divmod(): 'int' and 'complex'

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

The arguments of `divmod` must be integers (`int`) or real (`float`) numbers.
At least one of the arguments was a complex number.

Exception raised on line `69` of file 'TESTS:\runtime\test_type_error.py'.

   66| a = 2
   67| b = 3 + 2j
   68| try:
-->69|     result = divmod(a, b)
                    ^^^^^^^^^^^^
   70| except TypeError as e:

        a:  2
        b:  (3+2j)
        divmod:  <builtin function divmod>

function got multiple argument

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 996, in test_function_got_multiple_argument
    fn2(0, a=1)
TypeError: test_function_got_multiple_argument.<locals>.fn2() got multiple values for argument 'a'

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

You have specified the value of argument `a` more than once
when calling the function named `fn2`.
This function has the following arguments:
`a, b=1`

Exception raised on line `996` of file 'TESTS:\runtime\test_type_error.py'.

   992| def fn2(a, b=1):
   993|     pass
   994|
   995| try:
-->996|     fn2(0, a=1)
            ^^^^^^^^^^^
   997| except TypeError as e:

        fn2:  <function fn2>
            defined in <function test_function_got_multiple_argument>

function has no len

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 919, in test_function_has_no_len
    len(bad)
TypeError: object of type 'function' has no len()

    Did you forget to call `bad`?

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

I suspect that you forgot to add parentheses to call `bad`.
You might have meant to write:
`len(bad())`

Exception raised on line `919` of file 'TESTS:\runtime\test_type_error.py'.

   915| def bad():
   916|     pass
   917|
   918| try:
-->919|     len(bad)
            ^^^^^^^^
   920| except TypeError as e:

        bad:  <function bad> defined in <function test_function_has_no_len>
        len:  <builtin function len>

getattr attribute name must be string

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 1044, in test_getattr_attribute_name_must_be_string
    getattr("__repr__", 1)  # as reported in issue #77
TypeError: getattr(): attribute name must be string

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

The second argument of the function `getattr()` must be a string.

Exception raised on line `1044` of file 'TESTS:\runtime\test_type_error.py'.

   1037| if friendly_traceback.get_lang() == "en":
   1038|     assert (
   1039|         "The second argument of the function `hasattr()` must be a string."
   1040|         in result
   1041|     )
   1042|
   1043| try:
-->1044|     getattr("__repr__", 1)  # as reported in issue #77
             ^^^^^^^^^^^^^^^^^^^^^^
   1045| except TypeError as e:

        getattr:  <builtin function getattr>

method got multiple argument

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 1016, in test_method_got_multiple_argument
    t.some_method(0, a=1)
TypeError: test_method_got_multiple_argument.<locals>.T.some_method() got multiple values for argument 'a'

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

You have specified the value of argument `a` more than once
when calling the function named `t.some_method`.
This function has only one argument: `a`

Exception raised on line `1016` of file 'TESTS:\runtime\test_type_error.py'.

   1012|         pass
   1013|
   1014| t = T()
   1015| try:
-->1016|     t.some_method(0, a=1)
             ^^^^^^^^^^^^^^^^^^^^^
   1017| except TypeError as e:

        t:  <T object>
            defined in <function test_type_error.test_method_got_multiple_argument>
        t.some_method:  <bound method T.some_method>
            of <T object>
            defined in <function test_type_error.test_method_got_multiple_argument>

vars arg must have dict

Traceback (most recent call last):
  File "TESTS:\runtime\test_type_error.py", line 964, in test_vars_arg_must_have_dict
    vars(f)
TypeError: vars() argument must have __dict__ attribute

A `TypeError` is usually caused by trying
to combine two incompatible types of objects,
by calling a function with the wrong type of object,
or by trying to do an operation not allowed on a given type of object.

The function `vars` is used to list the content of the
`__dict__` attribute of an object.
Object `f` uses `__slots__` instead of `__dict__`.

Exception raised on line `964` of file 'TESTS:\runtime\test_type_error.py'.

   960|     assert no_slots not in result
   961|     assert use_slots not in result
   962|
   963| try:
-->964|     vars(f)
            ^^^^^^^
   965| except TypeError as e:

        f:  <F object>
            defined in <function test_type_error.test_vars_arg_must_have_dict>
        vars:  <builtin function vars>

UnboundLocalError

Missing both

Traceback (most recent call last):
  File "TESTS:\runtime\test_unbound_local_error.py", line 65, in test_Missing_both
    outer_missing_both()
  File "TESTS:\runtime\test_unbound_local_error.py", line 22, in outer_missing_both
    inner()
  File "TESTS:\runtime\test_unbound_local_error.py", line 21, in inner
    spam_missing_both += 1
UnboundLocalError: local variable 'spam_missing_both' referenced before assignment

    Did you forget to add either `global spam_missing_both` or
    `nonlocal spam_missing_both`?

In Python, variables that are used inside a function are known as
local variables. Before they are used, they must be assigned a value.
A variable that is used before it is assigned a value is assumed to
be defined outside that function; it is known as a `global`
(or sometimes `nonlocal`) variable. You cannot assign a value to such
a global variable inside a function without first indicating to
Python that this is a global variable, otherwise you will see
an `UnboundLocalError`.

You're trying to use the name `spam_missing_both` identified by Python as being
in the local scope of a function before having assigned it a value.

The name `spam_missing_both` exists in both the global and nonlocal scope.
This can be rather confusing and is not recommended.
Depending on which variable you wanted to refer to, you needed to add either

    global spam_missing_both

or

    nonlocal spam_missing_both

as the first line inside your function.

Execution stopped on line `65` of file 'TESTS:\runtime\test_unbound_local_error.py'.

   63| def test_Missing_both():
   64|     try:
-->65|         outer_missing_both()
               ^^^^^^^^^^^^^^^^^^^^
   66|     except UnboundLocalError as e:

        global outer_missing_both:  <function outer_missing_both>

Exception raised on line `21` of file 'TESTS:\runtime\test_unbound_local_error.py'.

   20| def inner():
-->21|     spam_missing_both += 1

        global spam_missing_both:  1

Missing global

Traceback (most recent call last):
  File "TESTS:\runtime\test_unbound_local_error.py", line 27, in test_Missing_global
    outer_missing_global()
  File "TESTS:\runtime\test_unbound_local_error.py", line 10, in outer_missing_global
    inner()
  File "TESTS:\runtime\test_unbound_local_error.py", line 9, in inner
    spam_missing_global += 1
UnboundLocalError: local variable 'spam_missing_global' referenced before assignment

    Did you forget to add `global spam_missing_global`?

In Python, variables that are used inside a function are known as
local variables. Before they are used, they must be assigned a value.
A variable that is used before it is assigned a value is assumed to
be defined outside that function; it is known as a `global`
(or sometimes `nonlocal`) variable. You cannot assign a value to such
a global variable inside a function without first indicating to
Python that this is a global variable, otherwise you will see
an `UnboundLocalError`.

You're trying to use the name `spam_missing_global` identified by Python as being
in the local scope of a function before having assigned it a value.

The name `spam_missing_global` exists in the global scope.
Perhaps the statement

    global spam_missing_global

should have been included as the first line inside your function.

Execution stopped on line `27` of file 'TESTS:\runtime\test_unbound_local_error.py'.

   25| def test_Missing_global():
   26|     try:
-->27|         outer_missing_global()
               ^^^^^^^^^^^^^^^^^^^^^^
   28|     except UnboundLocalError as e:

        global outer_missing_global:  <function outer_missing_global>

Exception raised on line `9` of file 'TESTS:\runtime\test_unbound_local_error.py'.

   8| def inner():
-->9|     spam_missing_global += 1

        global spam_missing_global:  1

Missing nonlocal

Traceback (most recent call last):
  File "TESTS:\runtime\test_unbound_local_error.py", line 46, in test_Missing_nonlocal
    outer_missing_nonlocal()
  File "TESTS:\runtime\test_unbound_local_error.py", line 16, in outer_missing_nonlocal
    inner()
  File "TESTS:\runtime\test_unbound_local_error.py", line 15, in inner
    spam_missing_nonlocal += 1
UnboundLocalError: local variable 'spam_missing_nonlocal' referenced before assignment

    Did you forget to add `nonlocal spam_missing_nonlocal`?

In Python, variables that are used inside a function are known as
local variables. Before they are used, they must be assigned a value.
A variable that is used before it is assigned a value is assumed to
be defined outside that function; it is known as a `global`
(or sometimes `nonlocal`) variable. You cannot assign a value to such
a global variable inside a function without first indicating to
Python that this is a global variable, otherwise you will see
an `UnboundLocalError`.

You're trying to use the name `spam_missing_nonlocal` identified by Python as being
in the local scope of a function before having assigned it a value.

The name `spam_missing_nonlocal` exists in the nonlocal scope.
Perhaps the statement

    nonlocal spam_missing_nonlocal

should have been included as the first line inside your function.

Execution stopped on line `46` of file 'TESTS:\runtime\test_unbound_local_error.py'.

   44| def test_Missing_nonlocal():
   45|     try:
-->46|         outer_missing_nonlocal()
               ^^^^^^^^^^^^^^^^^^^^^^^^
   47|     except UnboundLocalError as e:

        global outer_missing_nonlocal:  <function outer_missing_nonlocal>

Exception raised on line `15` of file 'TESTS:\runtime\test_unbound_local_error.py'.

   14| def inner():
-->15|     spam_missing_nonlocal += 1

Typo in local

Traceback (most recent call last):
  File "TESTS:\runtime\test_unbound_local_error.py", line 104, in test_Typo_in_local
    test2()
  File "TESTS:\runtime\test_unbound_local_error.py", line 101, in test2
    alpha3 += 1
UnboundLocalError: local variable 'alpha3' referenced before assignment

    Did you mean `alpha1`?

In Python, variables that are used inside a function are known as
local variables. Before they are used, they must be assigned a value.
A variable that is used before it is assigned a value is assumed to
be defined outside that function; it is known as a `global`
(or sometimes `nonlocal`) variable. You cannot assign a value to such
a global variable inside a function without first indicating to
Python that this is a global variable, otherwise you will see
an `UnboundLocalError`.

Instead of writing `alpha3`, perhaps you meant one of the following:
*   Local scope: `alpha1`, `alpha2`

Execution stopped on line `104` of file 'TESTS:\runtime\test_unbound_local_error.py'.

   100|     alpha2 = 1
   101|     alpha3 += 1
   102|
   103| try:
-->104|     test2()
            ^^^^^^^
   105| except UnboundLocalError as e:

        test2:  <function test2> defined in <function test_Typo_in_local>

Exception raised on line `101` of file 'TESTS:\runtime\test_unbound_local_error.py'.

    98| def test2():
    99|     alpha1 = 1
   100|     alpha2 = 1
-->101|     alpha3 += 1

Using name of builtin

Traceback (most recent call last):
  File "TESTS:\runtime\test_unbound_local_error.py", line 125, in test_Using_name_of_builtin
    dist([])
  File "TESTS:\runtime\test_unbound_local_error.py", line 121, in dist
    max = max(points)
UnboundLocalError: local variable 'max' referenced before assignment

In Python, variables that are used inside a function are known as
local variables. Before they are used, they must be assigned a value.
A variable that is used before it is assigned a value is assumed to
be defined outside that function; it is known as a `global`
(or sometimes `nonlocal`) variable. You cannot assign a value to such
a global variable inside a function without first indicating to
Python that this is a global variable, otherwise you will see
an `UnboundLocalError`.

`max` is a Python builtin function.
You have tried to assign a value to `max` inside a function
while also using its original meaning in the function.

Note that it is generally not a good idea to give a local variable
the same name as a Python builtin function (like `max`).

Execution stopped on line `125` of file 'TESTS:\runtime\test_unbound_local_error.py'.

   122|     min = min(points)
   123|     return max - min
   124| try:
-->125|     dist([])
            ^^^^^^^^
   126| except UnboundLocalError as e:

        dist:  <function dist> defined in <function test_Using_name_of_builtin>

Exception raised on line `121` of file 'TESTS:\runtime\test_unbound_local_error.py'.

   120| def dist(points):
-->121|     max = max(points)
                  ^^^
   122|     min = min(points)

        max:  <builtin function max>

UnknownError

Generic

Traceback (most recent call last):
  File "TESTS:\runtime\test_unknown_error.py", line 24, in test_Generic
    raise UnknownException("Some informative message about an unknown exception.")
UnknownException: Some informative message about an unknown exception.

An exception of type `UnknownException` is a subclass of `Exception`.
Nothing more specific is known about `UnknownException`.

All built-in exceptions defined by Python are derived from `Exception`.
All user-defined exceptions should also be derived from this class.

Exception raised on line `24` of file 'TESTS:\runtime\test_unknown_error.py'.

   20| result = friendly_traceback.get_output()
   21| assert "UnknownException -> Exception" in result
   22|
   23| try:
-->24|     raise UnknownException("Some informative message about an unknown exception.")
   25| except Exception as e:

        global UnknownException:  <class test_unknown_error.UnknownException>

ValueError

Convert to int

Traceback (most recent call last):
  File "TESTS:\runtime\test_value_error.py", line 194, in test_Convert_to_int
    int('13a')
ValueError: invalid literal for int() with base 10: '13a'

A `ValueError` indicates that a function or an operation
received an argument of the right type, but an inappropriate value.

`'13a'` is an invalid argument for `int()` in base `10`.
In base `10`, `int()` is most often use to convert a string
containing the digits `0` to `9` into an integer.
The following characters are not allowed: `a`.

Exception raised on line `194` of file 'TESTS:\runtime\test_value_error.py'.

   190| if english:
   191|     assert "needs to be first converted using `float()`" in result
   192|
   193| try:
-->194|     int('13a')
            ^^^^^^^^^^
   195| except ValueError as e:

        int:  <class int>

Could not convert to float

Traceback (most recent call last):
  File "TESTS:\runtime\test_value_error.py", line 92, in test_Could_not_convert_to_float
    float("42b")
ValueError: could not convert string to float: '42b'

A `ValueError` indicates that a function or an operation
received an argument of the right type, but an inappropriate value.

The string `42b` cannot be converted to a `float`
as it does not represent a number.

Exception raised on line `92` of file 'TESTS:\runtime\test_value_error.py'.

   90| def test_Could_not_convert_to_float():
   91|     try:
-->92|         float("42b")
               ^^^^^^^^^^^^
   93|     except ValueError as e:

        float:  <class float>

Date invalid month

Traceback (most recent call last):
  File "TESTS:\runtime\test_value_error.py", line 60, in test_Date_invalid_month
    d = date(2021, 13, 1)
ValueError: month must be in 1..12

    Did you specify an invalid month?

A `ValueError` indicates that a function or an operation
received an argument of the right type, but an inappropriate value.

I am guessing that you specify an invalid value for a month
in a `date` object. Valid values are integers, from 1 to 12.

Exception raised on line `60` of file 'TESTS:\runtime\test_value_error.py'.

   57| def test_Date_invalid_month():
   58|     from datetime import date
   59|     try:
-->60|         d = date(2021, 13, 1)
                   ^^^^^^^^^^^^^^^^^
   61|     except ValueError as e:

        date:  <class datetime.date>

Not enough values to unpack

Traceback (most recent call last):
  File "TESTS:\runtime\test_value_error.py", line 28, in test_Not_enough_values_to_unpack
    a, b, c = d
ValueError: not enough values to unpack (expected 3, got 2)

A `ValueError` indicates that a function or an operation
received an argument of the right type, but an inappropriate value.

Unpacking is a convenient way to assign a name,
to each item of an iterable.
In this instance, there are more names (3)
than the length of the iterable, a string (`str`) of length 2.

Exception raised on line `28` of file 'TESTS:\runtime\test_value_error.py'.

   24| assert "ValueError: not enough values to unpack (expected 3, got 2)" in result
   25|
   26| d = "ab"
   27| try:
-->28|     a, b, c = d
   29| except ValueError as e:

        d:  'ab'

Pow third arg cannot be zero

Traceback (most recent call last):
  File "TESTS:\runtime\test_value_error.py", line 108, in test_Pow_third_arg_cannot_be_zero
    pow(2, 4, a)
ValueError: pow() 3rd argument cannot be 0

A `ValueError` indicates that a function or an operation
received an argument of the right type, but an inappropriate value.

The third argument of the function `pow()` cannot be zero.

Exception raised on line `108` of file 'TESTS:\runtime\test_value_error.py'.

   105| def test_Pow_third_arg_cannot_be_zero():
   106|     a = 0
   107|     try:
-->108|         pow(2, 4, a)
                ^^^^^^^^^^^^
   109|     except ValueError as e:

        a:  0
        pow:  <builtin function pow>

Slots conflicts with class variable

Traceback (most recent call last):
  File "TESTS:\runtime\test_value_error.py", line 75, in test_Slots_conflicts_with_class_variable
    class F:
ValueError: 'a' in __slots__ conflicts with class variable

A `ValueError` indicates that a function or an operation
received an argument of the right type, but an inappropriate value.

The name `a` is used both as the name of a class variable
and as a string item in the class `__slots__`;
this is not allowed.

Exception raised on line `75` of file 'TESTS:\runtime\test_value_error.py'.

   73| def test_Slots_conflicts_with_class_variable():
   74|     try:
-->75|         class F:
   76|             __slots__ = ["a", "b"]

Too many values to unpack

Traceback (most recent call last):
  File "TESTS:\runtime\test_value_error.py", line 44, in test_Too_many_values_to_unpack
    a, b = c
ValueError: too many values to unpack (expected 2)

A `ValueError` indicates that a function or an operation
received an argument of the right type, but an inappropriate value.

Unpacking is a convenient way to assign a name,
to each item of an iterable.
In this instance, there are fewer names (2)
than the length of the iterable, a `list` of length 3.

Exception raised on line `44` of file 'TESTS:\runtime\test_value_error.py'.

   41| def test_Too_many_values_to_unpack():
   42|     c = [1, 2, 3]
   43|     try:
-->44|         a, b = c
   45|     except ValueError as e:

        c:  [1, 2, 3]

int base not in range

Traceback (most recent call last):
  File "TESTS:\runtime\test_value_error.py", line 209, in test_int_base_not_in_range
    int('18', base=37)
ValueError: int() base must be >= 2 and <= 36, or 0

A `ValueError` indicates that a function or an operation
received an argument of the right type, but an inappropriate value.

The argument `base` of `int()` must be either zero
or any integer from 2 to 36.
You wrote 37 which is not allowed.

Exception raised on line `209` of file 'TESTS:\runtime\test_value_error.py'.

   207| def test_int_base_not_in_range():
   208|     try:
-->209|         int('18', base=37)
                ^^^^^^^^^^^^^^^^^^
   210|     except ValueError as e:

        int:  <class int>

remove item not in list

Traceback (most recent call last):
  File "TESTS:\runtime\test_value_error.py", line 236, in test_remove_item_not_in_list
    a_list.remove(b)
ValueError: list.remove(x): x not in list

A `ValueError` indicates that a function or an operation
received an argument of the right type, but an inappropriate value.

You have attempted to remove `b` from the list `a_list`.
However, `a_list` does not contain `b`.

Exception raised on line `236` of file 'TESTS:\runtime\test_value_error.py'.

   233| a_list = [1, 2, 3]
   234| b = 4
   235| try:
-->236|     a_list.remove(b)
            ^^^^^^^^^^^^^^^^
   237| except ValueError as e:

        a_list:  [1, 2, 3]
        b:  4
        a_list.remove:  <builtin method remove of list object>

time strptime incorrect format

Traceback (most recent call last):
  File "TESTS:\runtime\test_value_error.py", line 133, in test_time_strptime_incorrect_format
    time.strptime("2020-01-01", "%d %m %Y")
ValueError: time data '2020-01-01' does not match format '%d %m %Y'

A `ValueError` indicates that a function or an operation
received an argument of the right type, but an inappropriate value.

The value you gave for the time is not in the format you specified.
Make sure to use the same separator between items
(for example, between day and month) and keep the order the same
in both the data provided and the format you specified.
The following table might be useful:
https://docs.python.org/3/library/time.html#time.strftime
The following site might also be useful: https://www.strfti.me/

Exception raised on line `133` of file 'TESTS:\runtime\test_value_error.py'.

   129|     return
   130|
   131| import time
   132| try:
-->133|     time.strptime("2020-01-01", "%d %m %Y")
            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
   134| except ValueError as e:

        time:  <module time (builtin)>
        time.strptime:  <builtin function strptime>

ZeroDivisionError

Complex division

Traceback (most recent call last):
  File "TESTS:\runtime\test_zero_division_error.py", line 180, in test_Complex_division
    1 / zero
ZeroDivisionError: complex division by zero

A `ZeroDivisionError` occurs when you are attempting to divide a value
by zero either directly or by using some other mathematical operation.

You are dividing by the following term

     zero

which is equal to zero.

Exception raised on line `180` of file 'TESTS:\runtime\test_zero_division_error.py'.

   177| def test_Complex_division():
   178|     zero = 0j
   179|     try:
-->180|         1 / zero
                ^^^^^^^^
   181|     except ZeroDivisionError as e:

        zero:  0j

Division by zero literal

Traceback (most recent call last):
  File "TESTS:\runtime\test_zero_division_error.py", line 229, in test_Division_by_zero_literal
    1.0 / 0
ZeroDivisionError: float division by zero

A `ZeroDivisionError` occurs when you are attempting to divide a value
by zero either directly or by using some other mathematical operation.

You are dividing by zero.

Exception raised on line `229` of file 'TESTS:\runtime\test_zero_division_error.py'.

   225| if friendly_traceback.get_lang() == "en":
   226|     assert "Using the modulo operator, `%`, you are dividing by zero" in result
   227|
   228| try:
-->229|     1.0 / 0
            ^^^^^^^
   230| except ZeroDivisionError as e:

Division operator

Traceback (most recent call last):
  File "TESTS:\runtime\test_zero_division_error.py", line 20, in test_Division_operator
    1 / zero
ZeroDivisionError: division by zero

A `ZeroDivisionError` occurs when you are attempting to divide a value
by zero either directly or by using some other mathematical operation.

You are dividing by the following term

     zero

which is equal to zero.

Exception raised on line `20` of file 'TESTS:\runtime\test_zero_division_error.py'.

   13| if friendly_traceback.get_lang() == "en":
   14|     assert (
   15|         "The following mathematical expression includes a division by zero"
   16|         in result
   17|     )
   18|
   19| try:
-->20|     1 / zero
           ^^^^^^^^
   21| except ZeroDivisionError as e:

        zero:  0

Divmod

Traceback (most recent call last):
  File "TESTS:\runtime\test_zero_division_error.py", line 100, in test_Divmod
    divmod(1, zero)
ZeroDivisionError: integer division or modulo by zero

A `ZeroDivisionError` occurs when you are attempting to divide a value
by zero either directly or by using some other mathematical operation.

The second argument of the `divmod()` function is zero.

Exception raised on line `100` of file 'TESTS:\runtime\test_zero_division_error.py'.

    97| def test_Divmod():
    98|     zero = 0
    99|     try:
-->100|         divmod(1, zero)
                ^^^^^^^^^^^^^^^
   101|     except ZeroDivisionError as e:

        zero:  0
        divmod:  <builtin function divmod>

Float division

Traceback (most recent call last):
  File "TESTS:\runtime\test_zero_division_error.py", line 148, in test_Float_division
    1 / zero
ZeroDivisionError: float division by zero

A `ZeroDivisionError` occurs when you are attempting to divide a value
by zero either directly or by using some other mathematical operation.

You are dividing by the following term

     zero

which is equal to zero.

Exception raised on line `148` of file 'TESTS:\runtime\test_zero_division_error.py'.

   145| def test_Float_division():
   146|     zero = 0.0
   147|     try:
-->148|         1 / zero
                ^^^^^^^^
   149|     except ZeroDivisionError as e:

        zero:  0.0

Float divmod

Traceback (most recent call last):
  File "TESTS:\runtime\test_zero_division_error.py", line 164, in test_Float_divmod
    divmod(1, zero)
ZeroDivisionError: float divmod()

A `ZeroDivisionError` occurs when you are attempting to divide a value
by zero either directly or by using some other mathematical operation.

The second argument of the `divmod()` function is equal to zero.

Exception raised on line `164` of file 'TESTS:\runtime\test_zero_division_error.py'.

   161| def test_Float_divmod():
   162|     zero = 0.0
   163|     try:
-->164|         divmod(1, zero)
                ^^^^^^^^^^^^^^^
   165|     except ZeroDivisionError as e:

        zero:  0.0
        divmod:  <builtin function divmod>

Float modulo

Traceback (most recent call last):
  File "TESTS:\runtime\test_zero_division_error.py", line 132, in test_Float_modulo
    1 % zero
ZeroDivisionError: float modulo

A `ZeroDivisionError` occurs when you are attempting to divide a value
by zero either directly or by using some other mathematical operation.

Using the modulo operator, `%`, you are dividing by the following term

     zero

which is equal to zero.

Exception raised on line `132` of file 'TESTS:\runtime\test_zero_division_error.py'.

   125|     assert (
   126|         "The following mathematical expression includes a division by zero"
   127|         in result
   128|     )
   129|     assert "done using the modulo operator" in result
   130|
   131| try:
-->132|     1 % zero
            ^^^^^^^^
   133| except ZeroDivisionError as e:

        zero:  0.0

Integer division operator

Traceback (most recent call last):
  File "TESTS:\runtime\test_zero_division_error.py", line 49, in test_Integer_division_operator
    1 // zero
ZeroDivisionError: integer division or modulo by zero

A `ZeroDivisionError` occurs when you are attempting to divide a value
by zero either directly or by using some other mathematical operation.

You are dividing by the following term

     zero

which is equal to zero.

Exception raised on line `49` of file 'TESTS:\runtime\test_zero_division_error.py'.

   42| if friendly_traceback.get_lang() == "en":
   43|     assert (
   44|         "The following mathematical expression includes a division by zero"
   45|         in result
   46|     )
   47|
   48| try:
-->49|     1 // zero
           ^^^^^^^^^
   50| except ZeroDivisionError as e:

        zero:  0

Mixed operations

Traceback (most recent call last):
  File "TESTS:\runtime\test_zero_division_error.py", line 243, in test_Mixed_operations
    a = divmod(8, 1 // 2)
ZeroDivisionError: integer division or modulo by zero

A `ZeroDivisionError` occurs when you are attempting to divide a value
by zero either directly or by using some other mathematical operation.

The following mathematical expression includes a division by zero:

    divmod(8, 1 // 2)

Exception raised on line `243` of file 'TESTS:\runtime\test_zero_division_error.py'.

   241| def test_Mixed_operations():
   242|     try:
-->243|         a = divmod(8, 1 // 2)
                    ^^^^^^^^^^^^^^^^^
   244|     except ZeroDivisionError as e:

        divmod:  <builtin function divmod>
        1 // 2:  0

Modulo operator

Traceback (most recent call last):
  File "TESTS:\runtime\test_zero_division_error.py", line 81, in test_Modulo_operator
    1 % zero
ZeroDivisionError: integer division or modulo by zero

A `ZeroDivisionError` occurs when you are attempting to divide a value
by zero either directly or by using some other mathematical operation.

Using the modulo operator, `%`, you are dividing by the following term

     zero

which is equal to zero.

Exception raised on line `81` of file 'TESTS:\runtime\test_zero_division_error.py'.

   74| if friendly_traceback.get_lang() == "en":
   75|     assert (
   76|         "The following mathematical expression includes a division by zero"
   77|         in result
   78|     )
   79|
   80| try:
-->81|     1 % zero
           ^^^^^^^^
   82| except ZeroDivisionError as e:

        zero:  0

Raise zero negative power

Traceback (most recent call last):
  File "TESTS:\runtime\test_zero_division_error.py", line 196, in test_Raise_zero_negative_power
    zero**-1
ZeroDivisionError: 0.0 cannot be raised to a negative power

A `ZeroDivisionError` occurs when you are attempting to divide a value
by zero either directly or by using some other mathematical operation.

You are attempting to raise the number 0 to a negative power
which is equivalent to dividing by zero.

Exception raised on line `196` of file 'TESTS:\runtime\test_zero_division_error.py'.

   193| def test_Raise_zero_negative_power():
   194|     zero = 0
   195|     try:
-->196|         zero**-1
                ^^^^^^^^
   197|     except ZeroDivisionError as e:

        zero:  0